Line Drawing - Charts

1. Fuction entry

1.1 Desktop side

1.2 Mobile

2. Fuction introduction

2.1 Desktop

The corresponding serial numbers in the figure are explained as follows.


Area 1, displays all the types of drawing lines. There are multiple types of drawing lines under the same type of drawing, which can be selected by expanding the drop-down menu. If you need to uncheck a certain type of drawing line, click the first icon in area 1.

Area 2 shows the switch settings of line drawing, which are continuous line drawing, magnetic attraction function, all show/hide, and all delete.


1.2.1 Continuous line drawing: After enabling this option, you only need to select the line type once in area 1 of Figure 2-1 to draw multiple lines in a row.

1.2.2 Magnetic attraction function: When this option is turned on, it will automatically be attracted to the adjacent k-line during the process of drawing lines.

1.2.3 Show/hide all: When this option is turned on, all the lines of all cycles under the current stock will be shown/hide.

1.2.4 Delete all: Delete the line drawing of all cycles of the current stock.


Area 3, displays the small tool bar for drawing lines. Click to select the drawing line to appear. Each drawing line corresponds to a small tool bar. The settings include color, line style, line thickness, lock/unlock, and delete.

2.1.4 Settings window


Display the anchor point setting window of the line drawing, the function entrance is: click the selected line, click the right mouse button to call up the right-click menu, select "Anchor Point Setting", you can precisely set the anchor point of the line drawing to determine its drawing position.


2.2 Mobile




The corresponding serial numbers in the figure are explained as follows.


Area 1, showing all types of drawing lines. There are multiple types of drawing lines under the same type of drawing, which can be selected by expanding the left menu. If you need to uncheck a certain type of drawing, click the corresponding large type of drawing icon twice. can.


Area 2 shows the switch settings of line drawing, which are continuous line drawing, magnetic attraction function, all show/hide, and all delete.


-Continuous line drawing: After turning on this option, you only need to select the line type once in area 1 of Figure 2-1 to draw multiple lines in a row.

-Magnetic attraction function: When this option is turned on, it will automatically be attracted to the adjacent k-line during the process of drawing lines.

-Delete all: Delete the line drawing of all cycles of the current stock.


Area 3, displays the small tool bar for drawing lines. Click to select the drawing line to appear. Each drawing line corresponds to a small tool bar. The settings include color, line style, line thickness, lock/unlock, and delete.


Area 4, showing the current drawing guidelines, complete all anchor points to complete the drawing.


Area 5, exit the line drawing mode.